Buderus
Mechanical Vibration / Loose Components
Furnace vibrates excessively or rattles during operation
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Loose blower mounting, Unbalanced fan wheel, Loose panel screws, Pump or motor bearing wear
How to Fix / Troubleshooting
Safety: Turn off power before tightening or touching moving parts.
Steps:
- Tighten panels: Check and tighten all access panel screws on the Buderus furnace.
- Inspect blower mounts: Ensure the blower assembly is firmly secured and rubber isolation mounts are intact.
- Fan wheel: Look for debris stuck in the fan wheel and remove it. If the wheel is bent, it must be replaced.
- Pump noise: If vibration seems to come from the circulation pump, its bearings may be worn and the pump should be replaced.
Severe vibration should be evaluated by a professional to prevent damage.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Buderus Blower Assembly
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements