Danfoss
Excessive Vibration / Imbalanced Blower Wheel
Furnace causes noticeable vibration and rattling in ducts and nearby walls
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Debris in blower wheel, bent blower wheel, loose mounting screws, misaligned motor shaft
How to Fix / Troubleshooting
Safety first: Turn off power before working inside the blower compartment.
Steps:
- Inspect blower wheel: Remove the blower assembly and visually inspect the wheel for dirt buildup, missing fins, or foreign objects. Clean with a soft brush and vacuum.
- Check for damage: If the wheel is bent or cracked, replace it with an OEM wheel specified by Danfoss or the furnace manufacturer.
- Tighten hardware: Tighten all blower housing screws and motor mounting bolts. Ensure the wheel is centered in the housing.
- Test run: Reinstall the blower, restore power, and run the furnace. If vibration persists, a technician should check for ductwork resonance and motor alignment.
Advertisements
Repair Difficulty
Medium
3/5
Advertisements