US Stove
Display or User Interface Failure
Furnace display is blank or unreadable, but blowers or auger still run.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Failed display module, Loose display ribbon cable, Control board partial failure, Moisture damage to panel
How to Fix / Troubleshooting
Safety first: Disconnect power before removing the control panel.
Steps:
- 1. Inspect display connections: Remove the control panel and check the ribbon cable between the display and control board. Reseat firmly.
- 2. Look for moisture or corrosion: Dry the area gently and correct any sources of water intrusion.
- 3. Replace display module: If the rest of the furnace operates but the display is blank, replace the US Stove display or user interface module.
- 4. Control board: If replacing the display does not restore function, the control board may be partially failed and should be replaced.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Display / User Interface Module
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements