Door stops part way and courtesy light flashes a set number of times, but no numeric code is shown.

Safety first: Disconnect power before working on the door hardware.

• Inspect tracks and seals: Remove any ice, dirt, or debris from tracks and around the door edges. Check that weather seals are not folded or jammed.
• Lubricate hardware: Apply a suitable lubricant to hinges, roller stems, and pivot points. Do not lubricate the track running surface.
• Adjust force slightly: If allowed by the Garador manual, increase the open/close force settings slightly to compensate for seasonal stiffness, staying within safety limits.
• Re‑test: Run several cycles and verify that the door reverses properly when obstructed.