Gliderol Over‑Sensitive Force Reversal

Gliderol garage door reverses immediately when closing, even though nothing is in the way; no error code displayed.

Advertisements

Safety Warning

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Advertisements

Possible Causes

Force setting too low on control board, Dry or binding door rollers, Misaligned tracks increasing resistance, Weak motor capacitor reducing torque

How to Fix / Troubleshooting

Safety first: Keep clear of the door while testing. Do not increase force beyond safe levels.

Steps to correct nuisance reversals:

  • 1. Check for mechanical binding: Disengage the opener and move the door by hand. If it is stiff, address track alignment and lubrication first.
  • 2. Lubricate hardware: Apply silicone spray to rollers, hinges, and pivot points. Wipe off excess.
  • 3. Adjust force: On the Gliderol control board, slightly increase the down force setting. Make small adjustments and test after each change.
  • 4. Test safety reversal: Place a solid object (e.g., a piece of timber) under the door and close it. The door must reverse upon contact. If it does not, reduce force slightly.
  • 5. Check motor capacitor: If the door still struggles despite correct force, inspect and replace a weak motor capacitor.
Advertisements

Repair Difficulty

Medium 3/5

Required Part

Gliderol Motor Capacitor
Check Price on Amazon

We may earn a commission from links on this page.

Advertisements