Gliderol Door Obstruction or Binding

Gliderol garage door stops halfway when opening or closing and the opener light flashes, but no code is shown.

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Debris in tracks, Bent track sections, Damaged roller on door, Curtain rubbing on guide channels

Safety first: Disconnect power and secure the door before working on tracks.

Steps to clear binding:

1. Inspect tracks: Look for stones, screws, or other debris in the tracks or guides. Remove any obstruction.
2. Check for bends: Sight along the track for kinks or crushed areas. Gently straighten minor bends; replace severely damaged sections.
3. Inspect rollers: Replace any cracked or seized rollers on the door.
4. Lubricate guides: Lightly lubricate metal‑on‑metal contact points with silicone spray.

Medium 3/5

Gliderol Door Roller Set

Check Price on Amazon

We may earn a commission from links on this page.