Marantec
Worn Drive Components or Poorly Maintained Door Hardware
Garage door opener is very noisy, with grinding or rattling sounds during operation.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Dry or worn rollers and hinges, Loose chain or belt slapping rail, Worn internal gear or bearings in Marantec head, Loose mounting hardware on opener or rail
How to Fix / Troubleshooting
Safety first: Disconnect power before tightening hardware or lubricating parts.
- Lubricate door hardware: Apply garage door lubricant to metal rollers, hinges, and bearings. Do not lubricate plastic rollers or tracks.
- Adjust chain/belt tension: Tighten the tension nut on the Marantec rail so the chain/belt has minimal sag but is not overly tight.
- Tighten hardware: Check all rail brackets, header bracket, and opener mounting bolts. Tighten any loose fasteners.
- Inspect internal gear: If grinding persists, open the Marantec head and inspect the drive gear. Replace the gear kit if teeth are worn or damaged.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Marantec Gear Kit / Drive Chain or Belt
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements