Green LED on Motorlift opener blinks continuously; remotes do not operate the door.

Safety first: Keep clear of the door while testing remote operation.

Steps to fix:

• Reprogram remotes: Press and release the LEARN button on the Motorlift opener (LED will light or blink). Within 30 seconds, press and hold the remote button until the opener light blinks or clicks. Repeat for each remote.
• Test operation: Press the programmed remote to verify the door moves.
• Check for interference: Move wireless routers, LED lights, or other RF devices away from the opener if remote range is poor.
• Inspect antenna wire: Ensure the hanging antenna wire from the opener is intact and not cut or coiled tightly.
• Replace receiver module or logic board: If remotes will not program and the LED continues blinking abnormally, the internal receiver or logic board may be defective and require replacement.