Overhead Door
Improper Mounting or Unbalanced Door Vibration
Garage door opener vibrates excessively and shakes the ceiling on Overhead Door opener
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Opener mounted directly to drywall or weak framing, No vibration isolation, Unbalanced or out-of-track door, Loose rail connections
How to Fix / Troubleshooting
Safety first: Use proper ladders and eye protection when working overhead.
- 1. Inspect mounting: Ensure the opener is attached to solid ceiling joists or angle iron, not just drywall. Reinforce with perforated angle iron if needed.
- 2. Add vibration isolators: Install rubber isolation pads or vibration dampers between the opener and mounting brackets.
- 3. Tighten rail connections: Check the rail-to-opener and rail-to-header bracket bolts. Tighten securely.
- 4. Check door balance and track alignment: An unbalanced or misaligned door can cause vibration. Have a professional adjust springs and tracks if needed.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Opener Mounting Hardware and Vibration Isolators
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements