Wall console LED flashes six times and opener will not respond to remotes, but wall button may still work.

Safety first: Keep the door area clear while testing remote operation.

• Check antenna: On most Wayne Dalton openers, a thin wire hangs from the opener head as the antenna. Ensure it is intact, not cut short, and hanging down freely. Do not coil it up.
• Reprogram remotes: Press and release the "Learn" or "Program" button on the opener head (LED will light). Within 30 seconds, press the remote button you want to program. Wait for the opener light to blink or click. Test the remote.
• Test multiple remotes: If none of the remotes work but the wall button does, the receiver section may be faulty.
• Reduce interference: Move LED light bulbs or other RF-noisy devices (Wi-Fi routers, baby monitors) away from the opener. Try using a different brand of LED bulb rated as "garage door opener compatible".
• Receiver module replacement: Some Wayne Dalton models use a plug-in radio receiver board. If accessible, reseat the module. If still no response, replace the receiver module or use an external universal receiver kit compatible with Wayne Dalton openers.