E15
Electrolux Worn Motor Bearings / Internal Mechanical Wear

Disposal is extremely loud, with a harsh roaring or growling sound, even when not grinding hard items.

Advertisements

Safety Warning

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Advertisements

Possible Causes

Worn upper or lower motor bearings, Bent motor shaft, Long-term corrosion inside motor housing, Misaligned rotor

How to Fix / Troubleshooting

Safety First: Turn OFF power at the breaker before any inspection. Do not operate a disposal with severe mechanical noise for extended periods.

  • Step 1 – Eliminate foreign objects: Confirm there are no utensils or debris in the chamber by inspecting with a flashlight and removing any objects with tools.
  • Step 2 – Listen closely: Briefly run the unit with water. A deep growling or screeching that changes with speed usually indicates bearing wear.
  • Step 3 – Check mounting: Ensure the mounting ring and sink flange are tight to rule out vibration noise.
  • Step 4 – Replace unit: Motor bearings and internal rotor alignment are not serviceable on Electrolux disposals. Replace the complete unit to prevent seizure or further damage.
Advertisements

Repair Difficulty

Medium 3/5

Required Part

Complete Disposal Unit
Check Price on Amazon

We may earn a commission from links on this page.

Advertisements