Everbilt Mounting Ring Gasket / Support Ring Leak

Garbage disposal runs but water leaks from the joint between sink flange and mounting ring

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Misaligned Everbilt mounting ring, Damaged fiber or rubber gasket, Loose mounting screws, Sink flange not seated evenly

Safety first: Unplug the disposal or turn OFF the breaker.

Check mounting screws: Tighten the three mounting screws evenly around the Everbilt mounting ring.
Inspect gasket: If leaking persists, remove the disposal from the mounting ring and inspect the gasket between the sink flange and support ring. Replace if cracked or compressed.
Reassemble carefully: Reinstall the mounting assembly, ensuring the gasket is centered and the ring is tightened evenly.
Retest for leaks: Run water in the sink and observe the joint.

Medium 3/5

Mounting ring gasket

Check Price on Amazon

We may earn a commission from links on this page.