Disposal causes noticeable vibration and noise in adjacent cabinetry and countertop

Safety first: Turn OFF power before making adjustments.

• Check mounting contact: Ensure the Evergrind housing or mounting bracket is not touching the cabinet walls or shelf. Adjust position if needed.
• Add isolation: Install rubber or foam pads between mounting straps and cabinet where the Evergrind discharge piping is secured.
• Tighten mount: Firmly tighten the Evergrind mounting ring screws to reduce play.
• Balance check: Clear any debris from the Evergrind chamber and verify the turntable spins smoothly. If vibration remains severe, consider replacing the unit.