E12
Evergrind
Imbalanced Turntable or Loose Mount
Disposal vibrates excessively and causes the sink to shake during operation
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Bent Evergrind impeller lugs, Foreign object stuck on one side of Evergrind turntable, Loose Evergrind mounting ring, Warped Evergrind sink flange
How to Fix / Troubleshooting
Safety first: Turn OFF power before inspecting the unit.
- Check for debris: Remove the Evergrind splash baffle and inspect the chamber for items stuck to one side of the turntable. Remove with tongs.
- Rotate plate: Use a wooden dowel to spin the Evergrind turntable. It should rotate smoothly without wobble.
- Inspect impellers: Look for bent or missing Evergrind impeller lugs. If damaged, the disposer should be replaced.
- Tighten mounting: From below, tighten the Evergrind mounting ring screws evenly. Ensure the unit is firmly locked into the sink flange.
- Test with water: Run water and operate the Evergrind unit. If vibration remains severe, replace the disposer.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Evergrind mounting ring
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements