E23
Evergrind
Open Internal Switch or Thermal Protector
Disposal will not turn on, but there is power at the outlet and the reset button is not tripped
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Failed Evergrind internal overload that will not reset, Broken Evergrind internal wiring, Defective Evergrind motor switch, Open Evergrind stator winding
How to Fix / Troubleshooting
Safety first: Turn OFF the breaker and disconnect the Evergrind unit.
- Confirm external power: Test the outlet or junction box with a known-good device or meter to verify power is present.
- Attempt reset: Firmly press the Evergrind reset button once more. If it does not click or stay engaged, the overload may have failed.
- Inspect cord and plug: For corded Evergrind models, check for loose blades or damage at the plug.
- If still dead with confirmed power: Internal components are likely open. Replace the Evergrind disposer.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Evergrind disposer unit
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements