Franke Overcurrent / Overload Trip

Garbage disposal trips its reset button frequently or shuts off after a few seconds of operation.

Advertisements

Safety Warning

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Advertisements

Possible Causes

Dull grinding components causing strain, Partial jam in grinding chamber, Failing motor windings drawing excess current, Overloading with hard waste

How to Fix / Troubleshooting

Safety first: Turn OFF power at the breaker before working on the unit.

  • Inspect for jams: Use an Allen key to rotate the shaft and ensure it moves smoothly. Remove any debris with tongs.
  • Run with light load: After resetting the overload button, test the unit with only water and a small amount of soft food. Avoid bones, pits, or fibrous materials.
  • Check for overheating: If the housing becomes very hot quickly, the motor may be failing and drawing too much current.
  • Consider replacement: Frequent trips even with light loads usually indicate a worn-out Franke disposer motor unit that should be replaced.
Advertisements

Repair Difficulty

Medium 3/5

Required Part

Franke disposer motor unit
Check Price on Amazon

We may earn a commission from links on this page.

Advertisements