E11
Frigidaire
Internal Seal or Housing Failure
Garbage disposal leaks from the bottom of the unit, dripping onto the cabinet floor even when not running.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Worn internal shaft seal, Cracked disposal housing, Corroded grind chamber, Loose internal fasteners
How to Fix / Troubleshooting
Safety warning: Turn off power at the breaker and unplug the disposal if possible. Water and electricity together are hazardous.
- Step 1 – Confirm leak origin: Dry the exterior of the disposal. Run water into the sink without operating the unit and observe for drips from the bottom or seams of the housing.
- Step 2 – Check external connections: Ensure the discharge elbow and dishwasher inlet are not the source. Tighten those connections if needed.
- Step 3 – Identify internal leak: If water emerges from the motor housing or bottom center, the internal seals or chamber are compromised.
- Step 4 – Do not attempt internal disassembly: Frigidaire disposals are factory-sealed; internal seal replacement is not a standard service procedure.
- Step 5 – Replace the disposal: Remove the old unit following installation instructions and install a new Frigidaire disposal, ensuring all seals and connections are tight.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Disposal Housing / Internal Shaft Seal
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements