InSinkErator Overload Reset Mechanism Fault

Disposal will not start unless the reset button is pressed each time before use

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Weak or failing internal overload switch, Motor drawing near-trip current even at startup, Internal wiring fault to reset device

Safety first: Turn off power before inspection.

Check for mechanical drag: Use the bottom hex socket to ensure the grind plate spins freely. Remove any obstructions.
Light-load test: Run the disposal with only water and no food. If it still requires reset each time, the overload device is faulty.
No field repair: The overload reset is integrated into the motor assembly and not serviceable.
Replace disposal: Install a new InSinkErator unit to correct the issue.

Medium 3/5

Disposal Unit (Complete Assembly)

Check Price on Amazon

We may earn a commission from links on this page.