E15
Kraus
Control or Switch Miswiring
Kraus garbage disposal runs continuously and does not turn off when the wall switch is turned off (for batch-feed or miswired units).
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Line and load reversed at switch, Disposal wired to constant hot, Stuck relay in air switch module, Incorrect connection in junction box
How to Fix / Troubleshooting
Safety First: Immediately turn OFF the circuit breaker to stop the disposal. Do not use the sink until wiring is corrected.
- Step 1 – Confirm switch function: With the breaker OFF, remove the wall switch cover and verify that only the switched hot conductor goes to the disposal. The neutral should not be switched.
- Step 2 – Check junction box: Inspect the wiring compartment on the Kraus disposal or under-sink junction box. Ensure the hot (usually black) from the switch connects to the disposal hot lead, and neutrals (white) are tied together.
- Step 3 – Inspect air switch module (if used): If using an air switch, unplug the module. If the disposal stops, the module may have a stuck internal relay and should be replaced.
- Step 4 – Correct wiring: Rewire according to Kraus and local electrical codes. If you are not comfortable with electrical work, hire a licensed electrician.
- Step 5 – Test operation: Restore power and verify that the disposal starts and stops correctly with the switch or batch-feed stopper.
Advertisements
Repair Difficulty
Hard
4/5
Advertisements