E19
McAlpine
Sticking Overload / Faulty Reset Mechanism
Disposal will not run unless the reset button is held in or the housing is tapped; LED flashes once-long, nine-short.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Worn internal overload contacts, Debris lodged around reset button, Heat-damaged overload device, Weak reset spring
How to Fix / Troubleshooting
Safety first: Isolate power before touching the reset mechanism.
- Clean around reset button: Wipe away any grease or debris around the reset button on the underside of the McAlpine unit.
- Operate reset several times: With power off, press the reset button repeatedly to free any sticking mechanism.
- Test operation: Restore power and test. If the unit only runs when the button is held or after tapping, the overload device is failing.
A faulty overload/reset device is typically integrated into the motor assembly and requires replacement of the motor or complete disposal.
Advertisements
Repair Difficulty
Hard
4/5
Required Part
Motor Overload / Reset Assembly
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements