Miele Control or Switch Sticking

Disposal continues to run after the wall switch is turned off, or turns on by itself intermittently.

Advertisements

Safety Warning

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Advertisements

Possible Causes

Stuck wall switch contacts, Shorted control relay on PCB, Miswired constant hot feed, Moisture in switch box

How to Fix / Troubleshooting

Critical safety warning: Turn off the circuit breaker immediately. A disposal that runs unexpectedly is dangerous.

  • Inspect wall switch: Replace the switch if it feels hot, sticks, or shows signs of arcing.
  • Check wiring: Have a qualified person verify that the disposal is wired through the switch and not directly to a constant hot feed.
  • Control relay: If the unit is correctly wired but still runs with the switch off, the internal control relay may be stuck closed and the control module must be replaced.
  • Do not use until fixed: Leave the breaker off until the fault is corrected.
Advertisements

Repair Difficulty

Hard 4/5

Required Part

Control Module PCB
Check Price on Amazon

We may earn a commission from links on this page.

Advertisements