Water leaks from the side of the disposal where the drain pipe connects.

Safety first: Disconnect power at the breaker before working under the sink.

• Tighten coupling: Use a wrench or by hand (depending on fitting type) to snug the discharge coupling. Do not overtighten plastic parts.
• Inspect gasket: Disassemble the outlet connection and check the rubber gasket or O-ring. Replace if flattened, cracked, or missing.
• Check for cracks: Examine the outlet neck on the disposal body. If cracked, the unit must be replaced.
• Reassemble and test: Reconnect the drain, run water, and observe for leaks.