Moen Loose Debris or Worn Impeller Pivot

Moen garbage disposal makes a loud rattling or clanking noise during operation

Advertisements

Safety Warning

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Advertisements

Possible Causes

Small hard objects bouncing in grind chamber, Loose impeller pivot pins, Worn jam plate causing excessive play, Broken grind ring segments

How to Fix / Troubleshooting

Safety first: Turn off power at the switch and unplug or switch off the breaker.

  • Remove loose items:
    • Shine a flashlight into the disposal.
    • Use tongs to remove any small bones, bottle caps, or other debris.
  • Check impeller play:
    • With power disconnected, gently move each impeller side to side.
    • They should pivot freely but not feel excessively loose or detached.
  • Listen after clearing:
    • Restore power, run water, and test briefly.
    • If rattling continues with no debris, the impeller assembly or jam plate is likely worn.
  • Replace unit if internal wear is severe:
    • Moen disposals are not designed for internal rebuild; replace the disposal if internal components are loose or broken.
Advertisements

Repair Difficulty

Medium 3/5

Required Part

Impeller Assembly
Check Price on Amazon

We may earn a commission from links on this page.

Advertisements