Moen Imbalance / Mounting Misalignment

Moen garbage disposal vibrates excessively and shakes the sink or countertop

Advertisements

Possible Causes

Loose mounting ring on Moen mounting assembly, One impeller stuck or missing, Foreign object lodged on one side of jam plate, Misaligned discharge piping stressing the unit

How to Fix / Troubleshooting

Safety first: Turn off the disposal and unplug or switch off the breaker before touching the unit.

  • Check for obstructions:
    • Look into the grind chamber with a flashlight.
    • Remove any debris with tongs.
    • Ensure both impellers swing freely.
  • Inspect mounting assembly:
    • From under the sink, grasp the disposal and try to move it.
    • If it wobbles at the sink, tighten the mounting ring by rotating it clockwise until snug.
  • Check discharge piping:
    • Ensure the P-trap and drain pipes are aligned without forcing the disposal sideways.
    • Loosen and realign slip joints if necessary.
  • Test operation:
    • Restore power, run water, and test.
    • If vibration persists and one impeller is missing or jam plate is warped, replace the disposal.
Advertisements

Repair Difficulty

Easy 2/5

Required Part

Mounting Assembly
Check Price on Amazon

We may earn a commission from links on this page.

Advertisements