Moen
Overload Protector or Internal Switch Fault
Moen garbage disposal will not turn on unless the reset button is pressed each time
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Weak or failing overload protector, Internal short causing repeated overcurrent, Motor drawing excessive current even under light load, Defective internal wiring or control in Moen unit
How to Fix / Troubleshooting
Safety first: Unplug the disposal or turn off the breaker before inspection.
- Check for mechanical issues:
- Ensure the jam plate spins freely using a jam-buster wrench.
- Remove any obstructions from the grind chamber.
- Observe operation:
- Restore power, run water, and turn on the disposal.
- If it runs briefly then trips the reset under no load, the overload protector or motor is failing.
- Do not bypass safety devices:
- Never attempt to bypass the reset/overload; this is a fire hazard.
- Replace the unit:
- Because the overload and internal wiring are not serviceable, replace the Moen disposal.
Advertisements
Repair Difficulty
Hard
4/5
Required Part
Overload Protector (Integral to Motor Assembly)
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements