Garbage disposal drains very slowly; water backs up into sink while disposal is off

Safety first: Turn off power to the disposal. Place a bucket under the trap before disassembly.

• Check for standing water: If water stands in the sink, do not run the disposal until the blockage is cleared.
• Clean P-trap: Loosen the slip nuts on the P-trap and remove it. Empty contents into the bucket and clean out any debris.
• Inspect discharge elbow: Check the Project Source discharge elbow for obstructions and clean as needed.
• Flush drain line: If the trap is clear, the clog may be further in the wall. Use a drain snake to clear the line or contact a plumber.
• Reassemble and test: Reinstall the trap and fittings, run water, and test drainage with the disposal off and then on.