Garbage disposal leaks from the side discharge connection to the drain pipe

Safety first: Disconnect power and avoid running water until the leak is corrected.

• Inspect discharge elbow: Locate the side outlet where the Project Source disposal connects to the drain trap. Check for cracks and ensure the metal clamp or screws are tight.
• Reseat gasket: If the elbow can be removed, loosen the clamp or screws, pull the elbow off, and inspect the rubber gasket between the disposal outlet and elbow. Replace if deformed or brittle.
• Align piping: Reinstall the elbow, ensuring the drain piping is aligned without forcing the elbow sideways. Tighten the clamp or screws evenly.
• Test for leaks: Run water and observe the joint. Tighten slightly more if any seepage remains.