Project Source Pressure-Related Leak at Discharge or Internal Crack

Garbage disposal runs but water leaks only when the unit is operating (not when just running water)

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Loose discharge elbow under pressure, Hairline crack in disposal housing, Loose internal baffle, Misaligned trap causing flex during operation

Safety first: Turn off power and place a pan under the unit.

Observe leak source: Run water and briefly turn on the Project Source disposal while watching for leaks at the discharge elbow and housing seams.
Tighten discharge connection: Snug the clamp or screws on the discharge elbow and realign piping if needed.

If water appears from a crack in the housing or from the bottom only when running, the internal chamber is compromised. Replace the disposal.

Medium 3/5

Discharge Elbow & Housing

Check Price on Amazon

We may earn a commission from links on this page.