Project Source
Imbalance or Loose Mounting
Garbage disposal vibrates excessively and shakes the sink or countertop
Advertisements
Possible Causes
Loose Project Source mounting assembly, Bent or damaged turntable, Foreign object stuck on one side of chamber, Loose or misaligned drain piping
How to Fix / Troubleshooting
Safety first: Disconnect power before touching the unit or mounting hardware.
- Check for debris: Inspect the grinding chamber and remove any lodged items that could unbalance the turntable.
- Verify mounting ring: Under the sink, ensure the disposal is fully rotated into the mounting ring and locked. Tighten the three mounting screws evenly.
- Support drain piping: Make sure the discharge pipe and trap are properly supported and not pulling the disposal sideways.
- Test with water: Restore power, run water, and operate the disposal. Mild vibration is normal; strong shaking after these steps suggests a bent turntable or internal damage.
If vibration remains severe, replacement of the disposal is recommended to prevent damage to the sink and plumbing.
Advertisements
Repair Difficulty
Easy
2/5
Required Part
Mounting Assembly
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements