Project Source Complete Outlet Obstruction

Garbage disposal will not accept water; water stands in the chamber and does not drain even with disposal running

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Solid blockage at discharge outlet, Foreign object lodged in discharge elbow, Collapsed rubber gasket, Severe clog in immediate downstream pipe

Safety first: Turn off power and do not continue to run the disposal against a blockage.

Check discharge elbow: Remove the trap and discharge elbow from the Project Source disposal and inspect for obstructions or collapsed gaskets.
Clear blockage: Remove any foreign objects and flush the elbow and trap with water.
Inspect outlet port: Look into the disposal outlet for obstructions and clear them with a non-metallic tool.
Reassemble and test: Reinstall plumbing, run water, and test with a brief disposal run.

Medium 3/5

Discharge Elbow & Gasket

Check Price on Amazon

We may earn a commission from links on this page.