Project Source Overheating Motor

Project Source garbage disposal is very hot to the touch after short use

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Extended run time under heavy load, Partial jam causing high current draw, Inadequate ventilation around unit, Failing motor bearings

Safety first: Turn off power and allow the unit to cool before touching it.

Limit run time: Avoid running the disposal continuously for more than a few minutes.
Clear chamber: Ensure there are no jams and that the rotor spins freely with a hex wrench.
Improve ventilation: Remove clutter from under the sink that may trap heat around the motor.

If the disposal overheats quickly under light use, the motor is failing and replacement is recommended.

Medium 3/5

Motor Assembly

Check Price on Amazon

We may earn a commission from links on this page.