Garbage disposal trips the internal reset button frequently, even with light loads.

Safety first: Turn off power before cleaning or inspection.

• Clean exterior: Wipe dust and grease from the motor housing and ensure ventilation slots (if present) are not blocked.
• Reduce load: Avoid continuous operation for more than a minute at a time. Feed waste gradually with plenty of cold water.
• Check for binding: Confirm the impeller plate spins freely with the hex key. Any drag increases current draw and heat.
• Monitor operation: If the reset trips even with minimal use and free rotation, the overload or motor is failing. Replacement of the disposal is usually required, as overload devices are integrated.