Reginox Control Switch or Wiring Short

Garbage disposal turns on by itself or runs unexpectedly without the switch being operated.

Advertisements

Safety Warning

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Advertisements

Possible Causes

Shorted wall switch, Water intrusion into air switch tubing or control box, Miswired shared circuit, Stuck internal relay on electronic models

How to Fix / Troubleshooting

Safety first: Turn off the breaker immediately if the unit runs unexpectedly.

  • Inspect wall switch: Replace any switch that feels hot, loose, or shows signs of arcing.
  • Check air switch system: For air-activated Reginox models, inspect the air tubing and control box for moisture. Dry thoroughly and replace tubing if waterlogged.
  • Review wiring: Ensure the disposal is wired to a dedicated switch and not tied into another circuit incorrectly.
  • Control module replacement: If an internal relay is stuck closed, the electronic control module may need replacement.
Advertisements

Repair Difficulty

Hard 4/5

Required Part

Wall Switch or Air Switch Control Box
Check Price on Amazon

We may earn a commission from links on this page.

Advertisements