Garbage disposal vibrates excessively and shakes the sink or countertop during use.

Safety first: Turn OFF power at the breaker before adjusting the mounting assembly.

• Step 1 – Clear chamber: Use tongs to remove any visible debris. Rotate the impellers with a wooden spoon to ensure nothing is stuck.
• Step 2 – Check mounting tightness: Under the sink, grasp the disposal and try to move it. Tighten the mounting ring or 3-bolt assembly evenly until the unit is firmly secured to the sink flange.
• Step 3 – Inspect discharge alignment: Ensure the discharge elbow and drain pipes are aligned without forcing the disposal to one side. Adjust piping if necessary.
• Step 4 – Test with water: Restore power, run cold water, and briefly operate the disposal. If vibration remains severe, internal components may be bent.
• Step 5 – Replace if internal damage: If tightening and clearing debris do not resolve the vibration, replace the disposal to prevent damage to the sink and plumbing.