Water leaking from around jets in the spa shell
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Possible Causes
How to Fix / Troubleshooting
Safety first: Turn off power and lower water level below the leaking jet before disassembly.
Leaks around jets usually originate from the jet body or gasket behind the shell.
- Identify leaking jets: Look for moisture trails or damp insulation behind the shell near specific jets.
- Remove jet internals: Twist and pull out the jet insert to access the body.
- Access backside (if possible): Remove side panels and insulation to reach the rear of the leaking jet body.
- Tighten retaining nut: Gently tighten the jet body nut from the backside. Do not overtighten, as this can crack the shell or body.
- Replace gasket if needed: If the gasket is brittle or deformed, remove the jet body and install a new gasket compatible with American Whirlpool jets.
Extensive jet leaks or those requiring shell penetration work are best handled by an experienced spa repair technician.
Repair Difficulty
Required Part
We may earn a commission from links on this page.