Artesian Spas
Jet Body or Gasket Leak
Water is leaking from around one or more jets in the shell
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Deteriorated jet body gasket, Cracked jet body, Loose jet retaining nut
How to Fix / Troubleshooting
Safety: Turn off power and lower water level below the leaking jet before disassembly.
- Confirm leak location: Remove the cabinet panel behind the leaking jet and inspect for water trails from the jet body.
- Remove jet insert: From inside the spa, twist and pull out the jet insert to access the body.
- Tighten retaining nut: From the back side, gently tighten the large plastic nut holding the jet body to the shell.
- Replace gasket if needed: If tightening does not stop the leak, remove the jet body, clean the shell surface, and install a new Artesian-compatible jet gasket or use approved spa sealant.
Allow sealant to cure per manufacturer instructions before refilling above the jet.
Advertisements
Repair Difficulty
Hard
4/5
Required Part
Jet Body Gasket for Artesian Spas
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements