Water is not circulating through the filter area; surface remains still during filtration cycles

Safety: Turn off power at the GFCI breaker before removing filters.

• Remove and clean filters: Rinse thoroughly from inside out. Replace if pleats are collapsed or stained.
• Check skimmer weir: Ensure the floating weir door moves freely and is not stuck closed.
• Verify filter cycles: On the topside, confirm that filtration cycles are programmed per Artesian’s recommendations.
• Check circulation pump: Confirm that the circ pump runs during filtration and that water returns through the filter area.

Persistent lack of filtration flow usually indicates a failing circulation pump or severe blockage in the suction line.