Beachcomber Spa Lighting System Failure

LED lights flicker, some colors do not work, or the light system is completely out.

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Failed LED driver on control board, Water intrusion into light housing, Loose light harness connection, Burned-out LED module

Safety: Turn off power at the GFCI before inspecting lights.

Check connections: Locate the light harness at the control pack and ensure it is firmly connected.
Inspect light lens: Look for water inside the main light lens; if present, the housing seal has failed.
Cycle power: Restore power and test light functions from the topside.

Failed LED modules or drivers typically require replacement of the light assembly or control board, which is best handled by a technician.

Medium 3/5

LED light assembly

Check Price on Amazon

We may earn a commission from links on this page.