Spa water is not circulating through some Bullfrog JetPaks; certain seats have no flow at all

Safety: Turn OFF power at the GFCI breaker before removing JetPaks.

• Adjust diverter valves: Rotate the Bullfrog diverter valves to direct more flow to the seats that are not receiving water.
• Reseat JetPaks: Lift the affected JetPaks out and then reinstall them, ensuring they fully engage with the manifold and sit flush.
• Check for blockages: Inspect the rear of the JetPak and the manifold openings for debris. Remove any obstructions.
• Bleed air: With the spa running, briefly loosen a fitting (if accessible) near the affected JetPak line to release trapped air, then retighten.