Jets are weak or no water comes out of jets even though pump is running.

Safety: Turn off power before opening unions or removing filters.

• Clean filters: Remove and thoroughly rinse Canadian Spa Company filter cartridges. Replace if old or collapsed.
• Open valves: Ensure all slice valves and diverter valves are fully open and positioned to send water to the jets you are testing.
• Bleed air: Loosen the pump union slightly until water flows steadily, then retighten to remove trapped air.
• Check jets: Many jets are adjustable; turn the jet faces counterclockwise to open them fully. Remove and clean any jets that appear clogged.

If flow remains weak, the pump impeller may be damaged or the pump may be worn and require replacement.