Clearwater Spas
Shell or Jet Body Leak
Water level in spa drops over time with no visible leak in equipment bay.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Cracked jet body on Clearwater Spas shell, Loose jet gasket, Leak at suction fitting, Hairline crack in acrylic shell
How to Fix / Troubleshooting
Safety first: Turn off power if water level drops below skimmer or suction fittings to avoid running pumps dry.
- Mark water level: Use a piece of tape to mark the water line and monitor drop over 24 hours.
- Inspect around jets: Look for damp insulation or water stains around specific jet locations under the cabinet.
- Tighten jet bodies (if accessible): Some jet bodies have retaining nuts accessible from the back; gently snug them.
Locating and repairing shell or jet body leaks often requires partial foam removal and is best done by a spa leak specialist.
Advertisements
Repair Difficulty
Professional Required
5/5
Advertisements