Jets do not work, no water movement when JETS button is pressed

Safety first: Turn off power at the GFCI breaker before touching the pump or wiring.

Steps:

• Check GFCI: Verify that the spa’s GFCI outlet or breaker is not tripped. Reset if necessary.
• Listen for pump: With power ON and JETS button pressed, listen for humming. A humming pump that does not turn may have a stuck impeller or failed capacitor.
• Inspect pump area: Remove the equipment panel and check for leaks or signs of overheating around the Dream Maker jet pump.
• Check fuses: Some control packs have internal fuses for pump circuits. With power OFF, inspect and replace blown fuses with identical ratings.
• Free impeller (if accessible): With power OFF and water drained below pump level, remove the pump wet end or front cover and check for debris blocking the impeller. Clean and reassemble.
• Replace pump: If the motor is seized or windings are open, replace the jet pump with a compatible Dream Maker pump (matching voltage, HP, and frame size).
• Control board: If the pump tests good but never receives power, the pump relay on the control board may be faulty and the control pack may need replacement.