Dynasty Spas
Overheating Electrical Component
Acrid or burning electrical smell coming from the equipment bay.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Overheating pump motor, Failing contactor or relay on control board, Loose high-current connection causing arcing
How to Fix / Troubleshooting
Safety first: Immediately turn off power at the breaker and do not operate the spa until the source is identified.
- Visual inspection: After components cool, open the equipment bay and look for discolored wires, melted insulation, or burn marks on the control pack and pumps.
- Check connections: With power off, tighten any loose lugs at the control pack and pump terminals.
- Identify failing component: If a pump or relay shows signs of overheating, replace the affected pump or have the control board serviced.
- Professional service: Due to fire risk, have a qualified spa technician or electrician inspect and repair any overheated electrical components.
Advertisements
Repair Difficulty
Professional Required
5/5
Advertisements