GFCI
Dynasty Spas
Ground Fault / Leakage Current Detected
Display may be blank; external GFCI breaker trips immediately or shortly after turning on the spa.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Water intrusion in pump or heater, Shorted heater element, Damaged wiring in equipment bay, Faulty GFCI breaker
How to Fix / Troubleshooting
Safety first: Do not repeatedly reset a tripping GFCI. This indicates a potentially dangerous fault.
- Visual inspection: With power off, open the Dynasty Spas equipment bay and look for obvious signs of water leaks, burnt wires, or moisture on components.
- Dry moisture: If you find minor condensation, allow the area to dry completely before attempting to reset.
- Isolate components (advanced): A technician may disconnect the heater, then pumps, one at a time to identify which component causes the trip.
- Replace faulty part: Common culprits are the heater element or a pump motor with internal leakage. Replace the defective component and verify safe operation.
Advertisements
Repair Difficulty
Professional Required
5/5
Required Part
Heater Assembly
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements