rE
Everlast Spas
Internal Control Pack Reset / EEPROM Error
Display shows rE or RE and spa may reboot or lose settings.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Power fluctuations, Failing control board memory, Corrupted programming, Moisture on control board
How to Fix / Troubleshooting
Safety first: Disconnect power before removing the control pack cover.
- Stabilize power: Ensure the Everlast spa is on a dedicated circuit with proper voltage and a quality GFCI breaker.
- Dry electronics: Inspect the control pack for condensation or leaks. Dry thoroughly and correct any plumbing leaks above the pack.
- Factory reset: If supported, perform a factory reset of the Everlast control pack following the owner's manual instructions.
- Replace control pack: If rE recurs frequently and other components test good, replace the Everlast control pack.
Advertisements
Repair Difficulty
Professional Required
5/5
Advertisements