Jet pump runs but no water comes out of the jets after refilling the spa.

Safety: Turn off power at the GFCI breaker before loosening any unions.

• Verify water level: Ensure water is above all suction fittings and skimmer.
• Open valves: Confirm all suction and return valves to the pump are fully open.
• Bleed pump: Loosen the union on the pump discharge side until air escapes and water begins to seep, then retighten.
• Restart pump: Restore power and run the pump. Repeat bleeding if necessary until water flow is restored.

If the pump still will not prime, there may be a suction-side leak or internal pump issue requiring service.