Spa will not power on at all; no lights on control panel, no pump activity.
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Possible Causes
How to Fix / Troubleshooting
High-voltage safety: Only check electrical components if you are comfortable and qualified. Always turn off power at the main panel before opening any covers.
- Check breakers: Inspect the main spa breaker and any GFCI breaker or outlet feeding the spa. Reset if tripped. If it trips again immediately, do not continue resetting—there is likely a fault.
- Inspect disconnect box: If your spa has an external disconnect, open it (with power OFF) and check for loose wires or burned connections.
- Check control box fuse: Remove the Hanscraft control pack cover and locate any internal fuses. With power OFF, remove and visually inspect or test with a multimeter. Replace only with the same type and rating.
If power is present at the spa terminals but the control remains dead, the control board or internal transformer may have failed and should be replaced by a technician.
Repair Difficulty
Required Part
We may earn a commission from links on this page.