Hanscraft Display / Keypad Power Failure

Topside control panel display is blank or very dim, but pumps may still operate via service mode.

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Failed topside control, Loose ribbon cable, Faulty low-voltage supply on control board, Water ingress into keypad

Shock hazard: Turn off power at the breaker before accessing the control pack.

Check cable connection: Unplug and replug the Hanscraft topside ribbon cable at the control board.
Inspect for moisture: Look for condensation or water inside the topside housing. If present, the keypad likely needs replacement.
Test with known-good keypad: If available, connect a compatible Hanscraft keypad to determine if the issue is with the panel or main board.

Replace the faulty component (keypad or control board) based on test results.

Medium 3/5

Hanscraft Topside Control Panel

Check Price on Amazon

We may earn a commission from links on this page.