P2
Jacuzzi
Pump 2 Failure or Overload
Display shows P2 ERROR or PUMP2 FAIL; secondary jet pump does not operate.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Tripped thermal overload on pump 2, Seized pump 2 motor, Loose or burned wiring, Failed pump 2 relay on control board
How to Fix / Troubleshooting
Safety: Disconnect power before inspection.
- Visual inspection: Check pump 2 for leaks, rust, or signs of overheating.
- Check wiring: Tighten all electrical connections at the pump and control board.
- Test manually: With power restored, press JETS 2 and listen for operation. A humming sound without rotation indicates a seized motor.
Replace the pump 2 assembly if the motor is seized or shorted. If the pump is good but P2 error remains, the control board likely needs service.
Advertisements
Repair Difficulty
Medium
3/5
Advertisements