Lay-Z-Spa hose connections drip or spray water when the pump is running, even after tightening.

Safety first: Unplug the spa before tightening or replacing any hoses.

• 1. Use stopper caps: Fit stopper caps inside the spa to block water flow, then remove the leaking hose/adapter.
• 2. Inspect components: Look for hairline cracks in the adapter body and check O-rings for damage.
• 3. Replace O-rings: Fit new Lay‑Z‑Spa O-rings if old ones are flattened or cracked.
• 4. Reassemble carefully: Align threads properly and hand-tighten only. Do not use tools that can distort plastic.
• If leaks persist: Replace the hose adapter or hose assembly as needed.